Product Description
LM2596 Voltmeter Buck Module Constant Voltage Step-down Programmable Board
Technical Parameter:
IN+: Input positive pole IN-: Input negative pole OUT+: Out positive pole OUT-: Out negative pole Input voltage range: 5-32V (The high limit voltage is 32V; in order to avoid to be burnt, please leave room to use ) Output voltage range: 0-30.0V Output power: Max 30W Output current: Max 1.5A ( If over 1.5A, please forced heat dissipation ) Output voltage set resolution: 0.1v Product weight: 24g Product size: 66 x 36 x 14mm Display color: Red, blue, green
Operation instructions:
Before connect the wire, please look the character beside input and output terminals carefully in advance to ensure proper wiring in strict accordance with the character; Before operate the button, please look the character beside PCB carefully in advance to ensure know the function of each button.
1. ON/OFF key is to control input voltage. When connect the power supply, the module can default output the voltage. Press the button on time, the output voltage function is closed, press it again, it can work, followed by recycling. 2. The two button on the tube left (IN key and OUT key ) can switch the tube display between the current input voltage and the current output voltage. 3. SET key is to set output voltage. Press SET shortly, the decimal places of output voltage will be flashing. It shows this place enters into the set mode. You can press the two buttons (+ key and – key) on the tube left to increase or decrease the value. So you can set the output voltage increase or decrease. After choosing the needed value on decimal place, you can press the set button again; the integer places of output voltage will be flashing. It shows this place enters into the set mode. You can use the same to control the two buttons get the value you need. After get the value you need, you can press the SET key to quit this set mode; if you don’t press the set key, the set mode will be automatically exited and the current set value will be automatically stored. Package included:
1 x LM2596 Voltmeter Buck Module
